Established in 1985,Didtek Valve Group is a Professional Supplier of Industrial valves for major...
中文
English
Didtek floating ball valve is divided into forged and cast, the cast floating ball valve is in two pieces, and the forged floating ball valve in two pieces or three pieces. Under normal circumstances, the ...
Didtek WCB 16" 300LB Cast Steel Y Strainer, 16"ANSI 300, RF FLANGE, ASTM A-216-WCB BODY, SCREE 316SS, 8 MESH. Cast Y Strainer is a device for mechanically removing solids from flowing liquids or gases by m...
Didtek Inverted Pressure Balance Lubricated Plug valves are suitable for use in the pipelines for various kinds of working conditions,with nominal pressure of Class 150-2500 and working temperature of -29-...
Didtek Tilting Disc Retainerless Type Wafer Check Valve features a single cast body without pin retainer holes in the body. This design minimizes prospective leak paths through the valve body making it a p...
Slurry Knife Gate Valve Slurry valve is named because of its application in the mine. It is made of three-piece combination.
Didtek Pneumatic control valve are used to regulate the flow, pressure and level of the media. According to the signal of the regulation site, the opening degree of the valve is automatically controlled so...
Didtek Triple Offset Wafer Butterfly valve is used to prevent galling and scratches between the metal seat and the metal disc due to its unique design. The only time where the seal comes into contact with ...
Didtek Butterfly valve design according to BS5155, API609, EN593, Face to face DIN3202K1/API609/EN558-1/ISO5752, End Flanges DIN2501/PN10/PN16/ASME B16.1/JISB2220.
Didtek CN7M Triple offset butterfly valve which can assemble with electric actuator or pneumatic actuator. With CN7M which can be applied to sea water and high corrossion medium. Didtek use high precession...
Didtek Cast Steel Lift Check Valve is used to prevent back flow in the line. Flow is in a straight line through the valve resulting in minimal pressure drop. The disc swings into the open position as the m...
