1.0619 Angle Globe Valve
Applicable Standards:
Design EN 13709
Face to face EN 558-1
End Flanges EN 1092-1
Butt Welding ends EN 12627
Inspection and test EN 12266-1
Material: 1.0619
Size Range: DN15~DN400
Pressure Rating: PN16, PN25, PN40
Temperature Range: -50°C~650°C
Design Description:
-Angle pattern
- Outside Screw and York
- Bolted Bonnet and Pressure Seal
- Seat in stellite or 13%Cr
- Available with gear operator
- Flange Ends
- Butt-welding Ends
Brand | DIDTEK |
Structure | Angle Globe |
Valve Material | Didtek provide cast steel, stainless steel, special alloy, CI, DI etc |
Valve Type | Didtek Produce Globe Valve |
Valve Test | 100% quantity tested before delivery |
Valve Guarantee | 18 months after shipments and 12 months after installed |
Valve Structure | Angle Globe Valve |
Valve Delivery | 15 - 30 days |
Valve Sample | Sample Available by Didtek Valve |
Valve Color | Customer request |
Valve Packing | Plywood Case for Globe Valve |
MOQ | 1 Set |
Valve Certificate | API6D/CE/ISO9001/ISO14001 |
Place of Origin | Zhejiang, China (Mainland) |
Delivery Detail: | Shipped in 15-30 days after payment |
Port | Shanghai Or Ningbo |
Payment Terms | L/C,D/A,D/P,T/T, Western Union |
Application & Function:
Didtek Din Angle Globe Valve with ports at an angle are called angle globe valves. The two ports may be oriented straight across from each other on the body, or oriented at an angle such as a 90°angle. Also It is used for throttling flow control. Shut off is accomplished by moving the disc against the flow stream rather than across it as in the case with a gate valve. The flow pattern through a globe valve involves changes in direction, resulting in greater resistance to flow, causing high pressure drop. The globe valve is an excellent valve to use for on-off service, but is highly suited for frequent cycling and control of fluids anywhere in amount or volume between the open and closed positions.
Didtek Din Angle Globe Valve must be installed in the proper relation to the media flow as indicated by the flow direction arrow marked on the valve body. This valve is considered uni-directional and must be installed with the pressure side or inlet under the seat.
Accessories:
Gear operators, actuators, locking devices, chain wheels and many others are available to meet the customer’s requirements.