Position Indicator Trim SS13Cr Regulating Disc Globe Valve
Globe valve, Design EN 13709
Steel valve, ASME B16.34
Face to face EN 588-1
End Flanges EN1092-1
Butt welding ends EN12627
Inspection and test EN12266-1
Size Range: DN15~DN400
Pressure Rating: PN16, PN25, PN40
Temperature Range: -50°C~600°C
- Outside Screw and Yoke
- Bolted Bonnet and Pressure Seal
- Rising stem and non-rising stem
- Available with gear operator
- Flange Ends and Buttwelding Ends
- Different type of disc availiable
- Low torque design, smooth surface stem .
|Didtek provide cast steel, stainless steel, special alloy, CI, DI etc
|Didtek Produce Globe Valve
|100% quantity tested before delivery
|18 months after shipments and 12 months after installed
|15 - 30 days
|Sample Available by Didtek Valve
|Plywood Case for Globe Valve
|Place of Origin
|Zhejiang, China (Mainland)
|Shipped in 15-30 days after payment
|Shanghai Or Ningbo
|L/C,D/A,D/P,T/T, Western Union
Application & Function:
Didtek Cast steel globe valve is used for throttling flow control. Shut off is accomplished by moving the disc against the flow stream rather than across it as in the case with a gate valve. The flow pattern through a globe valve involves changes in direction, resulting in greater resistance to flow, causing high pressure drop. Didtek Cast steel Globe valve is an excellent valve to use for on-off service, also is highly suited for frequent cycling and control of fluids anywhere in amount or volume between the open and closed positions.
Didtek Cast steel globe valve must be installed in the proper relation to the media flow as indicated by the flow direction arrow marked on the valve body. This valve is considered uni-directional and must be installed with the pressure side or inlet under the seat.
Accessories such as gear operators, actuators, bypasses,locking devices, chain wheels, extended stems and bonnets for cryogenic service and many others are available to meet the customers’requirements.