+86-18058825678
News

Didtek Dual Plate Wafer Check Valve

Views: 0     Author: Site Editor     Publish Time: 2022-03-31      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
sharethis sharing button

Didtek Dual Plate wafer check valve is a general purpose or high-performance check valve with a short face-to-face design.Unlike swing check valves,these valves are typically flangeless,installed between two flangers on the inside diameter of the flange bolt circle,held in place by studs.Spring tension can be customized to accommodate low,minimum,standard,or high torque springs.Additionally, seating surfaces of a wafer check valve can be specified to meet service demands with such materials as Buna-N,Viton,Teflon,Neoprene,EPDM,and Hypalon for bub-ble-tight seating.

Dual wafer check valve is commonly know as a dual disc check valve or dual check valve.They are spring-loaded and operate equally well in horizontal or vertical positions.Compatible body and disc material are offered in a wide variety of alloys for specific applications.Alloys include bronze,carbon steel,lnconel,X-750.lnconel 600,Monel,Hastelly C,and 17-7 PH.

CONTACT US

Didtek Valve Group Co., Ltd
Address: No.1 Puyi Road, Oubei Town, Yongjia County, Zhejiang, P.R.China.
Cell: +86-18058825678
Tel: +86-57767378255
Fax: +86-57767338181
Skype: didvalve-sales
Email: sales@didtekvalve.com

PRODUCT CATEGORY

WEBSITE

CONTACT US

Copyright © 2024 Didtek Valve Group Co., Ltd. | Sitemap | Support by leadong.com | Privacy Policy